ACOUSTILUX
PATTERNS & SIZES
LONG SHEETS....................... . . . .. . . . . . . . . LAY IN PANELS
Product Thickness 125 250 300 400 450 1200 CP1 CP2 CP3
Versilux 4.5 mm N.A X X X X X N.A X X
Versilux 6.0 mm X X X X X X X X X
Villaboard 6.0 mm N.A N.A N.A N.A N.A N.A X X X
Hardiflex 4.5 mm X X X X X X X X X
Hardiflex 6.0 mm X X N.A N.A N.A N.A X X N.A
SIZES PERFORATED
(refer table manufactured
sizes)
ALL ALL ALL 1200
wide
exclude
2700+
2100
long
900
wide
exclude
2700+
2100
long
1200
wide
exclude
2700+
2100
long
 
200 x 600+
600 x 600
nominal 1

 

MANUFACTURED SIZES
Versilux Lengths Widths
 
3600mm
3000
2700
2400
1800
1200
900
Hardiflex
3000
2700
2400
2100
1800
1200
900
Villaboard lay-in panels only
  PATTERN CHOICE
 
Design 250 and CP2 are standard pegboard pattern.
Design 300 is the usual pattern specified for a nail up or screw up ceiling application because of the versatility in sheet sizes. It is characterized by the attractive symmetrical tiled appearance.
Design 400 has a rectangular tiled appearance and battens are set out at 400mm centres. 1200mm wide sheets only
Design 450 is similar to design 400 but suits 450 batten centres. 900mm wide sheets only
Design 1200 is suspended ceiling panel in large sheets
Design CP3 is the recommended design for suspended ceiling panel application. It includes a nominal 25mm perimeter border which improves appearance in the exposed grid. It is usually manufactured in Villaboard although Versilux is similar in finish and characteristics and may be substituted by the manufacturer depending on availability
Design 125 and CP1 are used where maximum acoustic performance is required
WEIGHTS
Approximate square meters per tonne 4.5 mm 6.0 mm
Products based on Hardiflex 140m² 107m²
Products based on Villaboard -------- 112
...............
AVAILABILITY
All of the above designs are readily available and delivery can usually be effected with a minimum delay, expert designs 400 and 450 which are subject to a minimum quantity restriction of approximately 200m² or a special set up charge will be incurred. Delivery time on these set up charge will be incurred. Delivery time on these two designs can be up to ten days.

 

PREVIOUS